Kiddy Guardianfix Pro 2 User Manual download pdf (Page 36)

Take the diagonal belt and feed it in between the red diagonal belt guide (B)

and the headrest (G) (Fig. 30; Point 1). Now pull the belt to the inside toward

the child's neck (Fig. 30; Point 2).

Please ensure that the diagonal belt guide (B) opposite the belt

buckle is used (Fig. 32).

Make sure that the belt lies in the diagonal belt guide (B) and is not jammed

at the front of the hook (Fig. 31).

Make sure that the belts are not twisted and do not run too close to the child’s

body. Also check that the belt buckle is correctly positioned.

Now pull the belt system tight (Fig. 32).

Examine the belt distribution regularly during longer trips.

8. Opening the diagonal belt guide

To open the diagonal belt guide (B), press it downward (Fig. 33; Point 1) and

then take the belt out to the side (Fig. 33; Point 2).

9. Dismantling the k-fix after semi-universal use

Keep the release button (S) pressed in (Fig. 34; Point 1) while at the same

time pushing the seat (I) away from the backrest (Fig. 34; Point 2).

Open the left and right k-fix connectors (E) by pressing the release mecha-

nisms (V) towards the front (past the "green" lock indicator (W) (Fig. 35).

When the connectors (E) are open, the kiddy guardianfix pro 2 is decoupled

from the body of the car.

Finally the k-fix connectors (E) must be retracted into the seat (I).

Keep the release button (S) pressed in (Fig. 36; Point 1) while pulling on the

retraction tab (T) (Fig. 36; Point 2) until the connectors (E) are completely

inside the seat (I).

ENG

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 134 135

No comments

Kiddy Guardianfix Pro 2 User Manual Page 36